Singtel 3G Mobile Broadband APN Settings
In the previous article, I shared about Starhub’s mobile broadband APN settings. Some details in that article I shall not repeat here again. So, you might want to read that article on Starhub’s mobile broadband APN settings before you proceed with this article.
This article is written with users who wish to use the 3G USB dongle with a 3G router in mind. Before you proceed, it is important that you ensure that the 3G USB dongle provided by Singtel is compatible with the 3G router you are going to purchase.
Singtel mobile broadband APN settings as follows…
This article is written with users who wish to use the 3G USB dongle with a 3G router in mind. Before you proceed, it is important that you ensure that the 3G USB dongle provided by Singtel is compatible with the 3G router you are going to purchase.
Singtel mobile broadband APN settings as follows…
APN: internet
Access Number: *99#
Username:
Password:
PDP Type: IP
PDP Authentication Protocol: CHAP
As 3G mobile broadband providers tend to change their APN settings occasionally. Therefore, it is good to verify these settings to save you from unnecessary frustration. Take note that the above settings apply only to Singtel postpaid subscribers.Access Number: *99#
Username:
Password:
PDP Type: IP
PDP Authentication Protocol: CHAP
SingTel, Starhub, M1 APN Settings
Lester Chan · · · Blog
SingTel
- APN: e-ideas
- Username: 65ideas
- Password: 65ideas
- APN: internet
- Username: LEAVE_BLANK
- Password: LEAVE_BLANK
- APN: shinternet
- Username: LEAVE_BLANK
- Password: LEAVE_BLANK
- APN: shwapint
- Username: LEAVE_BLANK
- Password: LEAVE_BLANK
- APN: shwap
- Username: LEAVE_BLANK
- Password: LEAVE_BLANK
- Proxy: 10.12.1.2
- Port: 80
- APN: sunsurf
- Username: 65
- Password: user123
- APN: miworld
- Username: 65
- Password: user123
Singapore IDEA
how to execute AT-commands under Windows
No comments:
Post a Comment