Pages

▼

Tuesday, July 30, 2013

Singapore Broadband Access Point Name!

Singtel 3G Mobile Broadband APN Settings

In the previous article, I shared about Starhub’s mobile broadband APN settings. Some details in that article I shall not repeat here again. So, you might want to read that article on Starhub’s mobile broadband APN settings before you proceed with this article.
This article is written with users who wish to use the 3G USB dongle with a 3G router in mind. Before you proceed, it is important that you ensure that the 3G USB dongle provided by Singtel is compatible with the 3G router you are going to purchase.
Singtel mobile broadband APN settings as follows…
APN: internet
Access Number: *99#
Username:
Password:
PDP Type: IP
PDP Authentication Protocol: CHAP
As 3G mobile broadband providers tend to change their APN settings occasionally. Therefore, it is good to verify these settings to save you from unnecessary frustration. Take note that the above settings apply only to Singtel postpaid subscribers.




SingTel, Starhub, M1 APN Settings

· · · Blog
SingTel
  • APN: e-ideas
    • Username: 65ideas
    • Password: 65ideas
  • APN: internet
    • Username: LEAVE_BLANK
    • Password: LEAVE_BLANK
Starhub
  • APN: shinternet
    • Username: LEAVE_BLANK
    • Password: LEAVE_BLANK
  • APN: shwapint
    • Username: LEAVE_BLANK
    • Password: LEAVE_BLANK
  • APN: shwap
    • Username: LEAVE_BLANK
    • Password: LEAVE_BLANK
    • Proxy: 10.12.1.2
    • Port: 80
M1
  • APN: sunsurf
    • Username: 65
    • Password: user123
  • APN: miworld
    • Username: 65
    • Password: user123
Let me know whether if any of the above information is incorrect. I can only verify both SingTel APN is correct as I am a SingTel user.
, , , ,

Singapore IDEA
http://wiki.apnchanger.org/Singapore#Singapore_Telecom_Mobile_Pte_Ltd_.28SingTel.29

how to execute AT-commands under Windows
http://3g-modem.wetpaint.com/page/executing+AT-commands+under+Windows

Ref:/lesterchan.net/blog
at

No comments:

Post a Comment